🌟 Key Features
Disclaimer: SunVault Energy is an independent solar equipment reseller and is not affiliated with the manufacturer or brand unless otherwise stated
-
🅰️ A-Grade Cell Technology: Superior quality and consistency
-
🔋 Long Cycle Life: Over 6000 cycles at 80% DoD
-
⚙️ Integrated BMS: Full battery protection and cell balancing
-
⚡ High Efficiency: >99% round-trip energy efficiency
-
🧯 7-Layer Safety Protection: Including thermal and overcharge protection
-
💡 User-Friendly: Built-in LCD screen + plug-and-play terminals
-
🔧 Maintenance-Free: Zero-maintenance design
-
✅ Installation Flexibility: Stackable or surface mounted
-
🛡️ 5-Year Warranty: Reliable after-sales support
📐 Technical Specifications
Battery Type: LiFePO₄ (Lithium Iron Phosphate)
Nominal Voltage: 25.6V
Nominal Capacity: 106Ah
Total Energy: 2.71kWh
Energy Density: 2713.6Wh
Case Material: SPCC Steel
Terminal Type: Fast Plug In & Out
Cycle Life: >6000 Cycles @ 0.2C, 25°C, 80% DoD
Weight: 28kg
Dimensions (L × W × H): 470 × 350 × 155 mm
Mounting: Stackable or Shelf
⚡ Performance & Ratings
-
Voltage Window: 21.6V – 29.2V
-
Charge Voltage (Recommended): 28.8V ±0.2V
-
Max Charge Voltage: 29.2V ±0.2V
-
Charge Current (Recommended): 50A
-
Max Continuous Charge Current: 100A
-
Discharge Voltage (Recommended): 22.4V ±0.2V
-
Max Continuous Discharge Current: 100A
-
Peak Discharge Current: 150A
-
Self-Discharge (Monthly): Minimal
-
Parallel Connection Support: Up to 16 Units
-
Series Connection: Not Supported
-
Round-Trip Efficiency: >99%
-
Operating Temp: Wide range
-
IP Rating: Not Specified
🔒 Battery Management System (BMS)
-
✅ Primary & Secondary Charge/Discharge Protection
-
✅ Overcharge & Over-discharge Protection
-
✅ Temperature Monitoring & Cut-off
-
✅ Communication: RS485, RS232, CAN, Dryport
-
✅ Built-in LCD Screen for Real-Time Monitoring
📦 What’s in the Box
-
1 × SVOLT 25.6V 106Ah Lithium Battery
-
1 × Positive Cable (Red)
-
1 × Negative Cable (Black)
-
1 × Ethernet Communication Cable
-
1 × User Manual
-
5-Year Manufacturer Warranty
🧾 Warranty & Compliance
⚠️ Installation Notice:
All inverters and batteries must be installed by a qualified wireman or Master Electrician with valid registration from the Department of Labour. A Certificate of Compliance (COC) must be issued for solar/backup installations, in compliance with SANS 10142 standards. Warranty claims submitted without photos, COC, and qualified installer proof may be rejected.
Reviews
There are no reviews yet.